Substructure of building is in constant contact with soil and soil moisture along with accidental attack of sewerage water/ municipal water/ flood/ rain etc.

1. Water ingress in building causes dampness and due to capillary action it will continue to affect the walls, paints etc and inhabitants will have a tough time living in building ( both from hygiene point of view and aesthetically). Dampness can be tackled only at construction level. After construction all dampness removal techniques are bandaid solutions and not that effective and lasting.
2. Water causes corrosion of reinforcement in RCC and efflorescence in brickwork

Only solution to above two problems is to use water proofing material to create a barrier between substructure and superstructure. That is where bitumen comes in picture. Owing to its water resistant nature when applied at DPC/ plinth beam level it stops the water from sub structure to going upwards in building via blocking the capillary veins .

The post Bitumen Sprayer Rental Service near me | Jay Ambe appeared first on Jay Ambe Petro Chem Infra.

How Much Bitumen is Used to Build a Kilometre of Road?

This question does not have an easy solution. Influences include the weather, regional climate, make-up of the road base, volume of traffic, type of road, etc.
It should be determined which project type will be used: bitumen spray sealing, asphaltic concrete (AC), or both.
Bitumen content should be decided with regard to asphalt. Every building company has a different approach. The typical bitumen composition for roads is between 3.5% and 5%. So the size of the road should be determined after determining how much bitumen is in the asphalt mixture (For calculating the volume of bitumen in 1 KM road, Width & thickness is needed). The density of asphalt should be determined in the following stage. The typical person can accept 2330 Calculating the amount of bitumen in a kilometre of road, kg/m3.

1) Determine the size (Width and thickness)
2) To calculate the volume of asphalt, multiply the dimensions by 3.
3) Determine the asphalt’s density (2330 or 2450 kg/m3)
4) Determine the asphalt amount using the formula (Density* Volume) Kg/MTon.
5) Determine the amount of bitumen in the mix (3.5–5% in Asphalt).
6) Determine the amount of bitumen by multiplying the amount of asphalt by 3.5%.

The post Bitumen Emulsion manufacturer near me | Jay Ambe appeared first on Jay Ambe Petro Chem Infra.

Road Construction: Updates and Detours for Commuters

It takes meticulous planning, many evaluations, and a variety of evaluations, including analyses of the environment and the structure, and it includes multiple construction teams and plant equipment.

Road construction: Step-by-step process

This part of the article will walk you through each stage of the process of building a road. This procedure is for a project that will take place in the greenfield. Greenfield refers to projects that are brand new.

Improvements to the already-established sub base

Incorporating premix and its preparation

The transporters take the hot mixed material, carry it to the site, and distribute it using a mechanical paver at a temperature between 121 and 163 degrees Celsius.

The post Road Construction Contractor near me | Jay Ambe appeared first on Jay Ambe Petro Chem Infra.