Damber Concrete Materials Suppliers in Navi Mumbai | Jay Ambe Petrochem And Infra

Selection of Durable Construction Materials for Concrete Structures

For Damber Concrete Materials Suppliers in Navi Mumbai Contact Jay Ambe Petrochem And Infra

The principal ingredients that make up the concrete mix are cement, fine aggregate, coarse aggregate, water, chemical admixtures, and mineral admixtures. Concrete used in construction may also contain reinforcing bars, welded wire fabric (wire mesh), and various reinforcing fibers. The quality of the ingredients, their proportions, and the way they are mixed all affect the strength of the concrete.

The terms cement, concrete, and mortar can be confusing to DIYers because they are often used interchangeably—and inaccurately. Though the terms are often used synonymously, cement, concrete, and mortar are actually three distinctly different materials.

When you are about to start the construction work, you may have so many doubts which are not clear to you. This site attempts to address some common questions. If you have any other questions, you are welcome to write to us. Our panel of experts will be happy to provide you with the answers.

One of the most repeated problems in concrete is crazing. Crazing occurs when the surface shows several interconnected fine cracks or when the cement paste comes up to the surface and shrinks. Although the concrete strength probably is not affected, cracks will show up when the slab is damp. 

The durable concrete structures are to be conceptualized, specified,  designed,  contracted, constructed and maintained.  To achieve the design life of the structure at reasonable maintenance cost, the following aspects are required to be taken care of. You use sand, jelly, water, bricks, steel and such other material in your construction. Cement binds these elements together to provide strength and durability to your constructions.

Concrete can crack easily. It’s unpreventable, however, it can be controlled. This is one of the main problems when constructing concrete. Cement is a fine binding powder that is never used alone but is a component of both concrete and mortar, as well as stucco, tile grout, and thin-set adhesive.

The concrete should be impermeable,  with designed crack width due to shrinkage, thermal forces or loads.  Cracking can be the result of one or a combination of factors, such as drying shrinkage, thermal contraction, subgrade settlement, and applied loads. Cement is the binding element in both concrete and mortar. It is commonly made of limestone, clay, shells, and silica sand, with limestone being the most prevalent ingredient. These materials are crushed and combined with other ingredients (including iron ore), and then heated to about 2,700 F.