Bitumen Transport Services in vashi | Jay Ambe Petrochem And Infra

Steps in Bituminous Road Construction

1. Preparation of the existing base course layer

The existing surface is prepared by removing the pot holes or rust if any. The irregularities are filled in with premix chippings at least a week before laying surface course. If the existing pavement is extremely way, a bituminous leveling course of adequate thickness is provided to lay a bituminous concrete surface course on a binder course instead of directly laying it on a WBM.

2. Application of Tuck Coat

It is desirable to lay AC layer over a bituminous base or binder course. A tack coat of bitumen is applied at 6.0 to 7.5 kg per 10 sq.m area, this quantity may be increased to 7.5 to 10 kg for non-bituminous base.

3. Preparation and placing of Premix

The premix is prepared in a hot mix plant of a required capacity with the desired quality control. The bitumen may be heated up to 150 – 177 deg C and the aggregate temperature should not differ by over 14 deg C from the binder temperature.

The hot mixed material is collected from the mixture by the transporters, carried to the location is spread by a mechanical paver at a temperature of 121 to 163 deg C. the camber and the thickness of the layer are accurately verified.

4. Rolling

A mix after it is placed on the base course is thoroughly compacted by rolling at a speed not more than 5km per hour.

The initial or break down rolling is done by 8 to 12 tonnes roller and the intermediate rolling is done with a fixed wheel pneumatic roller of 15 to 30 tonnes having a tyre pressure of 7kg per sq.cm. the wheels of the roller are kept damp with water.

The number of passes required depends on the thickness of the layer. In warm weather rolling on the next day, helps to increase the density if the initial rolling was not adequate. The final rolling or finishing is done by 8 to 10 tonne tandem roller.

5. Quality control of bituminous concrete construction

The routine checks are carried out at site to ensure the quality of the resulting pavement mixture and the pavement surface.

Periodical checks are made for

a) Aggregate grading

b) Grade of bitumen

c) Temperature of aggregate

d) Temperature of paving mix during mixing and compaction.

For every 100 sq.m of the compacted surface, one test of the field density is conducted to check whether it is at least 95% of the density obtained in the laboratory. The variation in the thickness allowed is 6mm per 4.5m length of construction.

6. Finished surface

The AC surface should be checked by a 3.0 m straight edge. The longitudinal undulations should not exceed 8.0 mm and the number of undulations higher than 6.0 mm should not exceed 10 in a length of 300 m. The cross-traffic profile should not have undulations exceeding 4.0mm.

The post Bitumen Transport Services in vashi | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Road Construction Contractor in Vashi | Jay Ambe Petrochem And Infra

Service Details:

We are providing services of Bitumen Road Construction.

The post Road Construction Contractor in Vashi | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Truck Mounted Bitumen Sprayer Rental Service

Service Details:

Sprayer Boxer Services in navi Mumbai | Jay Ambe Petrochem And Infra

In order to attain a high level of customer gratification and trust, we are immensely indulged in providing Truck Mounted Bitumen Sprayer Rental Service to our customers’ at best possible rates. The servers offered by us for renting are of superior quality standards and are highly appreciated for their trouble free performance, uninterrupted service, longer working life, great connectivity and low maintenance. Moreover, the rents availed by us for these are very minimal. Additionally, our ability to give bulk servers on rent has earned us enormous appreciation in the industry.

Contact Information

Address : 917, Grohitam Building, Plot No. 14B, Sector – 19,
Near Mathadi Bhavan Signal, Vashi, Navi Mumbai – 400703.

Mobile : +91 90047 60967

Landline : 022-49797074

Email : jaiambepetrochem91@gmail.com

The post Sprayer Boxer Services in navi Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

 

Our company has achieved laurels in providing Bitumen Sprayer Rental Service.

---

Truck Mounted Bitumen Sprayer Rental Service

---

Service Details:

Work Location	Client Side
Rental Duration	as per client
Application	Road Construction

Sprayer Boxer Services in navi Mumbai | Jay Ambe Petrochem And Infra

In order to attain a high level of customer gratification and trust, we are immensely indulged in providing Truck Mounted Bitumen Sprayer Rental Service to our customers’ at best possible rates. The servers offered by us for renting are of superior quality standards and are highly appreciated for their trouble free performance, uninterrupted service, longer working life, great connectivity and low maintenance. Moreover, the rents availed by us for these are very minimal. Additionally, our ability to give bulk servers on rent has earned us enormous appreciation in the industry.

 

The post Sprayer Boxer Services in navi Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Bitumen Transport in Mumbai | Jay Ambe Petrochem And Infra

Bitumen Transport in Mumbai | Jay Ambe Petrochem And Infra

Our range of products include Bitumen Membrane Waterproofing Sheet, Bitumen Mineral Membrane Sheet and Bitumen Membrane Roll Sheet.

---

Bitumen Membrane Waterproofing Sheet

---

Product Details:

Pack Type	Roll
Length	10 m
Width	1 m
Material	Bitumen
Color	Black
Weight	30 – 35 Kg

We are one of the most well-distinguished companies in the market that are into offering Bitumen Membrane Waterproofing Sheet.

The post Bitumen Transport in Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Road Construction Contractor Services

Service Details:

With huge clientele assistance and industrial understanding, we are engaged in offering Road Construction Work. Rendered beneath the supervision of highly able executives. These are extremely admired in the market for flexibility and timely completion.

The post Road Construction Contractor in Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Thermoplastic Road Marking

The condition of the road surface is key to the successful application of thermoplastic road marking. To ensure that the thermoplastic markings properly bond with the surface of the road, it is vital that the road is clean. Any existing road markings, mud, oil, dust, grass, gravel or grease should be cleared from the road surface before work begins. You should also ensure that the road is completely dry. 

Thermoplastic is a plastic material made of a binder, pigments, filler, and glass beads. Hot-applied thermoplastic is prepared for road deposition in a melting apparatus where the
granular or block material is introduced and heated until it liquefies at temperatures exceeding
400F.

Sprayer Service Provider 

You should only apply thermoplastic road markings to a road surface which is at a temperature of 10°C and over. You can check the temperature of the road surface using either a non-contact infrared thermometer or a surface thermometer. Of available preform thermoplastic markings, Flametape is the only product that exhibits the same oil impervious qualities of hot-applied alkyd thermoplastic and is also pre-beaded. It is normally thermally-bonded to the pavement by preheating the substrate with a torch.

Failure to do so can compromise the bond between road making and the road. Providing that all necessary conditions are met concerning the nature of material and substrate. The binder is what makes the material tough, flexible, and creates the bond strength to adhere to the pavement surface while holding the other components together.

Often, the packaging material is designed to be part of the thermoplastic system and can be melted along. All the materials used in the road line marking, i.e., the thermoplastic, glass beads, primer, and sealer, must be certified. You should also retain samples of the thermoplastic road marking for future quality verification.

Contact Jay Ambe Petrochem And Infra For Sprayer Service Provider 

The post Sprayer Service Provider in Navi Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.