1. Asphalt
2. Concrete
3. Composite pavement
4. Recycled Materials

While on a road trip or on the way to work, have you ever wondered what materials were used to construct the road you are on? It’s important to know the materials that go into constructing roads, especially if you are in the construction business. You might have your road roller or paving machine at the ready but without proper knowledge on road materials and surfaces, your construction project might not be a success.Road Construction Contract in Navi Mumbai

However, there is no need to panic because here is what you need to know about the materials used for road construction.

Road Construction Contractor in Navi Mumbai | Jay Ambe Petrochem And Infra

The post Road Construction Contractor in Navi Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Road Construction Material Supplier in vashi | Jay Ambe Petrochem And Infra

The post Road Construction Material Supplier in vashi | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Bitumen Transport Services in vashi | Jay Ambe Petrochem And Infra

Steps in Bituminous Road Construction

1. Preparation of the existing base course layer

The existing surface is prepared by removing the pot holes or rust if any. The irregularities are filled in with premix chippings at least a week before laying surface course. If the existing pavement is extremely way, a bituminous leveling course of adequate thickness is provided to lay a bituminous concrete surface course on a binder course instead of directly laying it on a WBM.

2. Application of Tuck Coat

It is desirable to lay AC layer over a bituminous base or binder course. A tack coat of bitumen is applied at 6.0 to 7.5 kg per 10 sq.m area, this quantity may be increased to 7.5 to 10 kg for non-bituminous base.

3. Preparation and placing of Premix

The premix is prepared in a hot mix plant of a required capacity with the desired quality control. The bitumen may be heated up to 150 – 177 deg C and the aggregate temperature should not differ by over 14 deg C from the binder temperature.

The hot mixed material is collected from the mixture by the transporters, carried to the location is spread by a mechanical paver at a temperature of 121 to 163 deg C. the camber and the thickness of the layer are accurately verified.

4. Rolling

A mix after it is placed on the base course is thoroughly compacted by rolling at a speed not more than 5km per hour.

The initial or break down rolling is done by 8 to 12 tonnes roller and the intermediate rolling is done with a fixed wheel pneumatic roller of 15 to 30 tonnes having a tyre pressure of 7kg per sq.cm. the wheels of the roller are kept damp with water.

The number of passes required depends on the thickness of the layer. In warm weather rolling on the next day, helps to increase the density if the initial rolling was not adequate. The final rolling or finishing is done by 8 to 10 tonne tandem roller.

5. Quality control of bituminous concrete construction

The routine checks are carried out at site to ensure the quality of the resulting pavement mixture and the pavement surface.

Periodical checks are made for

a) Aggregate grading

b) Grade of bitumen

c) Temperature of aggregate

d) Temperature of paving mix during mixing and compaction.

For every 100 sq.m of the compacted surface, one test of the field density is conducted to check whether it is at least 95% of the density obtained in the laboratory. The variation in the thickness allowed is 6mm per 4.5m length of construction.

6. Finished surface

The AC surface should be checked by a 3.0 m straight edge. The longitudinal undulations should not exceed 8.0 mm and the number of undulations higher than 6.0 mm should not exceed 10 in a length of 300 m. The cross-traffic profile should not have undulations exceeding 4.0mm.

The post Bitumen Transport Services in vashi | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Road Construction Contractor in Vashi | Jay Ambe Petrochem And Infra

Service Details:

We are providing services of Bitumen Road Construction.

The post Road Construction Contractor in Vashi | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Cement & Sand rate in Maharashtra

Construction Bricks Rate in Maharashtra

TMT Steel Rate in Maharashtra for Construction

The post Road Construction Material Supplier in vashi | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Road Construction

Service Details:

We are providing services of Bitumen Road Construction.

The post Road Construction Contractor in Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

 

Our company has achieved laurels in providing Bitumen Sprayer Rental Service.

---

Truck Mounted Bitumen Sprayer Rental Service

---

Service Details:

Work Location	Client Side
Rental Duration	as per client
Application	Road Construction

Sprayer Boxer Services in navi Mumbai | Jay Ambe Petrochem And Infra

In order to attain a high level of customer gratification and trust, we are immensely indulged in providing Truck Mounted Bitumen Sprayer Rental Service to our customers’ at best possible rates. The servers offered by us for renting are of superior quality standards and are highly appreciated for their trouble free performance, uninterrupted service, longer working life, great connectivity and low maintenance. Moreover, the rents availed by us for these are very minimal. Additionally, our ability to give bulk servers on rent has earned us enormous appreciation in the industry.

 

The post Sprayer Boxer Services in navi Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.

Road Construction Material Supplier in Mumbai | Jay Ambe Petrochem And Infra

Jay Ambe Petrochem And Infra has achieved a well-known position in the market for Wholesale Trading of Bitumen Emulsion, Furnace Oil, Light Diesel Oil, Polymer Modified Bitumen, etc. Additionally, we provide Bitumen Sprayer Rental Service to our client. Our reliable presence in the market and positive approach has helped us in expanding our business and serving our client with products that meet their highest level of satisfaction. All these products are acquired from best vendors of the market. Our company ensures that these products are timely delivered to our clients.

Contact Information

Address : 917, Grohitam Building, Plot No. 14B, Sector – 19,
Near Mathadi Bhavan Signal, Vashi, Navi Mumbai – 400703.

Mobile : +91 90047 60967

Landline : 022-49797074

Email : jaiambepetrochem91@gmail.com

The post Road Construction Material Supplier in Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.