Substructure of building is in constant contact with soil and soil moisture along with accidental attack of sewerage water/ municipal water/ flood/ rain etc.

1. Water ingress in building causes dampness and due to capillary action it will continue to affect the walls, paints etc and inhabitants will have a tough time living in building ( both from hygiene point of view and aesthetically). Dampness can be tackled only at construction level. After construction all dampness removal techniques are bandaid solutions and not that effective and lasting.
2. Water causes corrosion of reinforcement in RCC and efflorescence in brickwork

Only solution to above two problems is to use water proofing material to create a barrier between substructure and superstructure. That is where bitumen comes in picture. Owing to its water resistant nature when applied at DPC/ plinth beam level it stops the water from sub structure to going upwards in building via blocking the capillary veins .

The post Bitumen Sprayer Rental Service near me | Jay Ambe appeared first on Jay Ambe Petro Chem Infra.

Steps of Road Construction

1. Readiness of the current base course layer
The current surface is ready by eliminating the pot openings or rust assuming any. The abnormalities are filled in with premix chippings no less than seven days prior to laying surface course. Assuming the current asphalt is amazingly way, a bituminous evening out course of sufficient thickness is given to lay a bituminous substantial surface seminar on a folio course rather than straightforwardly laying it on a WBM.
2. Utilization of Tuck Coat
It is alluring to lay AC layer over a bituminous base or cover course. A tack layer of bitumen is applied at 6.0 to 7.5 kg per 10 sq.m region, this amount might be expanded to 7.5 to 10 kg for non-bituminous base.
3. Arrangement and setting of Premix

The premix is ready in a hot blend plant of a necessary limit in with the ideal quality control. The bitumen might be warmed up to 150 – 177 deg C and the total temperature ought not vary by north of 14 deg C from the folio temperature. The hot blended material is gathered from the combination by the carriers, conveyed to the area is spread by a mechanical paver at a temperature of 121 to 163 deg C. the camber and the thickness of the layer are precisely checked. The control of the temperatures during the blending and the compaction are of extraordinary importance in the strength of the subsequent asphalt structure.
4. Rolling
A blend later it is put on the base course is totally compacted by moving at a speed not more than 5km each hour. The underlying or separate rolling is finished by 8 to 12 tons roller and the middle rolling is finished with a decent wheel pneumatic roller of 15 to 30 tons having a tire tension of 7kg per sq.cm. the wheels of the roller are kept clammy with water. The quantity of passes required relies upon the thickness of the layer. In warm climate moving on the following day, assists with expanding the thickness in the event that the underlying rolling was not sufficient. The last rolling or completing is finished by 8 to 10 ton pair roller.Tandem Roller – Road Construction

Fig: Tandem Roller

5. Quality control of bituminous substantial development
The standard looks at are conveyed at site to guarantee the nature of the subsequent asphalt blend and the asphalt surface. Periodical checks are made for a) Aggregate reviewing b) Grade of bitumen c) Temperature of total d) Temperature of clearing blend during blending and compaction. Somewhere around one example for each 100 tons of the blend released by the hot blend plant is gathered and tried for above prerequisites. Marshall tests are likewise led. For each 100 sq.m of the compacted surface, one trial of the field thickness is directed to check whether it is basically 95% of the thickness got in the research facility. The variety in the thickness permitted is 6mm per 4.5m length of development.

In order to attain a high level of customer gratification and trust, we are immensely indulged in providing Truck Mounted Bitumen Sprayer Rental Service to our customers’ at best possible rates. The servers offered by us for renting are of superior quality standards and are highly appreciated for their trouble free performance, uninterrupted service, longer working life, great connectivity and low maintenance. Moreover, the rents availed by us for these are very minimal. Additionally, our ability to give bulk servers on rent has earned us enormous appreciation in the industry.

The post Bitumen Sprayer Rental Service in Navi Mumbai | Jay Ambe Petrochem And Infra appeared first on Jay Ambe Petro Chem Infra.